USA S&A 3.16HP 220V CW-FL-2000BN Industrial Water Chiller for 2000W Fiber Laser

Description

Description
US Stock S&A 3.16HP 1P 220V CW-FL-2000BN Industrial Water Chiller for 2000W Fiber Laser
Ship out within 24-48hours on work days!
3 Years warranty
Support Local Pick-up and bulk order
Description:
S&A compressor refrigeration industrial water chiller CWFL-2000 with dual temp control function is produced by Guangzhou Teyu Electromechanical Co., Ltd. Our brands"S&A" and "TEYU" have gained approval and trust from thousands of manufacturer at home and abroad which enables our product export rate maintained at over 60% in long-term.
S&A CWFL series chiller is special for cooling Raycus, IPG, Max, nLIGHT, trumpf, Rofin and SPI fiber laser.
CWFL-2000 chiller is special applied for cooling 2000W fiber laser which is able to cool the fiber laser and optic lense at the same time, multiple use for saving cost, space and manual move, quiteconvenient for the user.
S&A industrial water chillers are popular for its 2 temperature control modes as constant temperature and intelligent temperature control. Under intelligent mode, the water temperature is adjusted according to ambient temperature. With that 1 key solution, customers no longer need to worry about the water temperature adjustment of seasonal changes.
Features:
1. 6500W cooling capacity; optional environmental refrigerant;
2. ±0.5°C precisely temperature control; The temperature range of S&A chiller is 5°C to 35°C, the controllable lowest water temperature depends on the heat load of cooled machine and cooling capacity of chiller. However, S&A suggest the best running temp is 20°C to 30°C for the chiller.
3. The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions;
4. Dual temperature to satisfy different needs of fiber laser device and the lens;
5. With Ion adsorption filtrating and test functions conform to fiber laser device operating requirements;
6. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm;
7. Multiple power specifications; CE, RoHS and REACH approval;
8. The chiller supports the Modbus-485 communication protocol, which can realize the communication between the laser system and multiple chillers. It can mainly realize two functions: to monitor the working state of the chiller and modify the parameters of the chiller.
9. Long working life and simple operation; Optional heater and water filter.
PROUCT PARAMETERS
Model
CW-FL-2000BN
Voltage
AC 1P 220V
Frequency
60Hz
Current
3.4~15.3A
Machine power
2.93KW
Electric assisted power
400W+600W
Precision
±0.5℃
Reducer
Capillary
Pump power
0.75 KW
Tank capacity
15 L
Inlet and outlet
Rp1/2"+Rp1"
Max. pump lift
53M
Max. pump flow
2L/min+>20L/min
N.W
95Kgs (265lb)
G.W
113Kgs (342lb)
Dimension
76cm x 56cm x 103cm(30in x 22in x 40.6in)
Package dimension
84cm x 74cm x 120cm(33in x 29.1in x 47.2in)
Note:
the working current can be different under different working conditions; The above information is for reference only. Please subject to the actual delivered product.
PRODUCT INTRODUCTION
Independent production of sheet metal, evaporator and condenser
Adopt lPG fiber laser for welding and cutting sheet metal.
High precision temperature control system with dual temperature control function Temperature control accuracy can reach: 0.5C. High temp. for QBH connectorloptics and low temp. for laser device.
Multiple alarm protection
The laser will stop working once it receives alarm signal from the water chiller for protection purpose.
Equipped with water pressure gauges ,drain outlet with valve and universal wheels.
Water pressure gauges help monitor the discharge pressure of water pump while universal wheels facilitate the moving of the chiller.
Dual inlet and dual outlet connector equipped.
Chiller inlet connects to laser outlet connector. Chiller outlet connects to laser inlet connector.
Level gauge equipped
Cooling fan of famous brand installed.
With high quality and low failure rate.
Customized dust gauze available and easy to take apart.
CHILLER APPLICATION