S&A Air Cooled Laser Chiller CWFL-20000 For 20KW Fiber Laser (AC 3P 380V 50HZ)

Description

S&A Air Cooled Laser Chiller CWFL-20000 features a dual circuit configuration and is applicable to cool fiber laser up to 20KW.
The CWFL series water chillers are so multi-functional that the fiber laser and the laser head can be cooled by the low temperature control system and the high temperature control system respectively at the same time, which can greatly reduce the generation of the condensed water and save cost & space.
Industrial chillers are applicable to cool fiber lasers from IPG, nLIGHT,Trumpf,Rofin,Coherent and SPI and provide effective cooling for laser cutting machines, laser welding machines and laser marking machines.
Features
1. With environmental refrigerant;
2. ±1℃ precise temperature control;
3. The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions;
4. Dual temperature to satisfy different needs of fiber laser and the laser head;
5. With Ion adsorption filtrating and test functions conform to fiber laser device operating requirements;
6. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm;
7. Multiple power specifications; CE approval; RoHS approval; REACH approval;
8. Optional heater and water filter.
9. Support Modbus-485 communication protocol, which can realize the communication between the laser system and multiple water chillers to achieve two functions: monitoring the working status of the chillers and modifying the parameters of the chillers.
THE WARRANTY IS 2 YEARS AND THE PRODUCT IS UNDERWRITTEN BY INSURANCE COMPANY.
SPECIFICATION
Model
CWFL-20000ET
Voltage
AC 3P 380V, 50Hz
Current
7.7~41.1A
Machine power
21.36KW
Electric assisted power
600W+4800W
Precision
±1℃
Reducer
Thermostatic expansion valve
Pump power
0.75KW+3KW
Tank Capacity
250L
Inlet and Outlet
Rp1/2"" + Rp1.1/2""
Max.lift
53M
Max.flow
3L/min+>150L/min
Net Weight
720KG(1587lb)
Gross Weight
846KG(1865lb)
Product Dimension
78.7"" x 39.4"" x 81.1"" (200 x 100 x 206cm)
Package Dimension
84"" x 48"" x 90"" (213 x 122 x 228cm)
Note: the working current can be different under different working conditions; The above information is for reference only. Please subject to the actual delivered product.
PRODUCT INTRODUCTION
Independent production of sheet metal, evaporator and condenser
Adopt IPG fiber laser for welding and cutting sheet metal.
High precision temperature control system with dual temperature control function
Temperature control accuracy can reach ±1℃. High temp. for laser head and low temp. for fiber laser
Multiple alarm protection
The laser will stop working once it receives alarm signal from the water chiller for protection purpose.
Equipped with water pressure gauges ,drain outlet with valve and universal wheels.
Water pressure gauges help monitor the discharge pressure of water pump while universal wheels facilitate the moving of the chiller.
Dual inlet and dual outlet connector equipped.
Chiller inlet connects to laser outlet connector. Chiller outlet connects to laser inlet connector.
Cooling fan of famous brand installed.
With high quality and low failure rate.