MT0006 Wrench - Remove Trim/Tilt Caps, Trim Seals for Yamaha, Suzuki, Johnson

Description

Features:
Application--for Trim Caps on ALL SHOWA manufactured Trim/Tilt Units,All Suzuki, Honda,Johnson, Evinrude,ALL Yamaha I4 2.8L (F175-F200),ALL Yamaha VMAX,Yamaha F115-F150,Yamaha 2-Strokes (115-225hp)
Function--To rebuild a leaked device on outboard engine, hydraulic trim and tilt unit .Used to remove and install the Trim and Tilt Caps without damaging it and the steering cylinder
Helloauto
Best choice of motor parts
Outboard Trim/Tilt Pin Wrench MT0006-32mm x 4mm Remove Trim/Tilt Caps, Trim Seals on Hydraulic Cylinders for Yamaha, Suzuki, Johnson, Evinrude, Honda Outboards
Features:
Application--for Trim Caps on ALL SHOWA manufactured Trim/Tilt Units,All Suzuki, Honda,Johnson, Evinrude,ALL Yamaha I4 2.8L (F175-F200),ALL Yamaha VMAX,Yamaha F115-F150,Yamaha 2-Strokes (115-225hp)
Function--To rebuild a leaked device on outboard engine, hydraulic trim and tilt unit .Used to remove and install the Trim and Tilt Caps without damaging it and the steering cylinder
A Must Have--Usually, you will put a little drift into one of those holes in the trim and tilt caps with a hammer. Than,you destroy these cap ,you will thrown them away,which cost a about hundred bucks. So, you really need the pin wrench to help you finish that case with ease
High Quality Material--Made of high hardened 4140 impact grade steel,with silver oxide coating which is rust-resistance and durable to use.Better than OEM.
Satisfaction Guarantee: If you're not 100% satisfied with this pin wrench MT0006, simply return it for a full refund in 30 days, guarantee with 12 months’ warranty
Product description:
Outboard Trim/Tilt Pin Wrench MT0006-32mm x 4mm
Used for removing Trim/Tilt Cylinder Caps on ALL SHOWA manufactured Trim/Tilt Units,
All Suzuki, Honda,Johnson, Evinrude,
ALL Yamaha I4 2.8L (F175-F200),
ALL Yamaha VMAX, Yamaha F115-F150, Yamaha 2-Strokes (115-225hp)
WHY YOU NEED THIS PIN WRENCH????
Usually,you will put a little drift into one of those holes with a hammer
Than,you destroy these cap ,you will thrown them away,which cost a about hundred bucks.
So, you really need the pin wrench to help you finish that case with ease
Come with 2 sets of pins 4 & 4.5
MIN Pin Strength: -180 ft-lb
Included: 3x 4mm pins; 3x 4.5mm pins
Replacement Pins: AMT0005 - S-4mm
Easy to Use
To rebuild a leaked device on outboard engine, hydraulic trim and tilt unit .
Used to remove and install the Trim and Tilt Caps without damaging it and the steering cylinder
Used with 1/2" socket drive
Yamaha Factory Tool:YB-06175-1A, YB-06548
Item Specifics
Brand
HA
Manufacturer Part Number
QP948
Warranty
1 Year
Type
Outboard Trim/Tilt Pin Wrench
Model
MT0006
size
32mm x 4mm
Fitment
for Yamaha, Suzuki, Johnson, Evinrude, Honda Outboards
Payment
1.
Payment methods accepted:
Payoneer
.
Our Payoneer account allows you to pay by credit card, debit card and your paypal balance.
2.
All major credit cards are accepted through our secure payment processor Payoneer.
Shipping
1.
Please
make sure your Ebay address is correct
before you pay, cause it cannot be changed once the order shipped out.
2.
All of our items are shipped from our
Warehouse in
USA
.
3.
Please feel free to contact us by ebay
"
Contact member
"
if you cannot get your order on time.
Returns
1.
Return to us
within 60 days
from the delivery date for exchange or refund.
Refund will be given as Money back or item exchange (buyer's choice).
2.
Return shipping fee is the responsibility of buyer unless the return is a result of our mistake. And all NON-seller mistake returns for refund are subject to 20% re-stocking fee.
3.
If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
Contact Us
Please contact us via ebay using"
Contact member
". We will respond within 24hours.Thank you for your understanding.
Helloauto
Best choice of motor parts
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Shop Category
Store Home
Other
Hot Item
Ford 7.3L Powerstroke Diesel Crankcase CCV Breather O-Ring Vent Valve Seals OEM
USD 19.98
2PC 64mm Oil Filter Cap Wrench for Toyota, Lexus,for 1.8L and 2.0L - 5.7L Engine
USD 19.99
VCM Muzzler Harness Disable Kit for Honda Acura Pilot Accord Ridgeline Odyssey
USD 55.98
Oil Filter Wrench for Toyota Camry, Tundra, Tacoma, 4Runner, RAV4 and More - 64m
USD 8.99
Injector Pressure Repair Kit/IPR 6.0 Valve for Ford 6.0L Powerstroke Excursion
USD 19.99
Excellent Delivery
Help & Info
Payment Policy
Shipping Policy
Return Policy
FAQ
About Us
New List Item
115225FS Tilt Trim Seal Kit for Yamaha Boat Power Units 115HP 150HP 175HP 200HP
USD 29.99
For Volvo Mack Radiator 9996049 Coolant Drain Hose For 2004~2019 Volvo Trucks
USD 33.99
Camshaft Holding Tool Kit EN-48383 & EN-46105 for 2.8L 3.0L 3.6L V6 Engines Saab
USD 24.99
For Ford Cam Phaser Lock Out Kit &Timing Chain Locking Wedge 4.6L/5.4L 3V Engine
USD 18.99
Heavy Duty Truck 10102 Universal U-Joint Puller &5192 Bearing Cup Installer Tool
USD 137.99
Outboard Trim/Tilt Pin Wrench MT0006-32mm x 4mm Remove Trim/Tilt Caps, Trim Seals on Hydraulic Cylinders for Yamaha, Suzuki, Johnson, Evinrude, Honda Outboards
Features:
Application--for Trim Caps on ALL SHOWA manufactured Trim/Tilt Units,All Suzuki, Honda,Johnson, Evinrude,ALL Yamaha I4 2.8L (F175-F200),ALL Yamaha VMAX,Yamaha F115-F150,Yamaha 2-Strokes (115-225hp)
Function--To rebuild a leaked device on outboard engine, hydraulic trim and tilt unit .Used to remove and install the Trim and Tilt Caps without damaging it and the steering cylinder
A Must Have--Usually, you will put a little drift into one of those holes in the trim and tilt caps with a hammer. Than,you destroy these cap ,you will thrown them away,which cost a about hundred bucks. So, you really need the pin wrench to help you finish that case with ease
High Quality Material--Made of high hardened 4140 impact grade steel,with silver oxide coating which is rust-resistance and durable to use.Better than OEM.
Satisfaction Guarantee: If you're not 100% satisfied with this pin wrench MT0006, simply return it for a full refund in 30 days, guarantee with 12 months’ warranty
Product description:
Outboard Trim/Tilt Pin Wrench MT0006-32mm x 4mm
Used for removing Trim/Tilt Cylinder Caps on ALL SHOWA manufactured Trim/Tilt Units,
All Suzuki, Honda,Johnson, Evinrude,
ALL Yamaha I4 2.8L (F175-F200),
ALL Yamaha VMAX, Yamaha F115-F150, Yamaha 2-Strokes (115-225hp)
WHY YOU NEED THIS PIN WRENCH????
Usually,you will put a little drift into one of those holes with a hammer
Than,you destroy these cap ,you will thrown them away,which cost a about hundred bucks.
So, you really need the pin wrench to help you finish that case with ease
Come with 2 sets of pins 4 & 4.5
MIN Pin Strength: -180 ft-lb
Included: 3x 4mm pins; 3x 4.5mm pins
Replacement Pins: AMT0005 - S-4mm
Easy to Use
To rebuild a leaked device on outboard engine, hydraulic trim and tilt unit .
Used to remove and install the Trim and Tilt Caps without damaging it and the steering cylinder
Used with 1/2" socket drive
Yamaha Factory Tool:YB-06175-1A, YB-06548
Payment
Shipping
Returns
Contact Us
1.
Payment methods accepted:
Payoneer
.
Our Payoneer account allows you to pay by credit card, debit card and your paypal balance.
2.
All major credit cards are accepted through our secure payment processor Payoneer.
1.
Please
make sure your Ebay address is correct
before you pay, cause it cannot be changed once the order shipped out.
2.
All of our items are shipped from our
Warehouse in
USA
.
3.
Please feel free to contact us by ebay
"
Contact member
"
if you cannot get your order on time.
1.
Return to us
within 60 days
from the delivery date for exchange or refund.
Refund will be given as Money back or item exchange (buyer's choice).
2.
Return shipping fee is the responsibility of buyer unless the return is a result of our mistake. And all NON-seller mistake returns for refund are subject to 20% re-stocking fee.
3.
If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
Please contact us via ebay using"
Contact member
". We will respond within 24hours.Thank you for your understanding.
All rights reserved.