CW-FL-1000BN Industrial Water Chiller for 1000W Fiber Laser, 2.01HP 220V, 60Hz

Description

S&A CW-FL-1000AN
industrial water chiller
for Cooling 1000W Fiber Laser,
With Dual Digital Temperature Controller, AC 1P 220V, 60Hz
CE, RoHS, ISO and REACH compliant
Stock in California, USA
2 Years warranty, Free technical support / Free Parts replacement
Door to Door delivery
Accept Local pick-up
CWFL-1000 chiller developed by S&A is made especially for fiber laser applications up to 1KW.
It comes with dual temperature control circuit particularly suitable for separate cooling for the fiber laser and the laser head.
No need of a two-chiller solution.
Offering temperature stability as tight as ±0.5℃, this laser chiller unit has been engineered to keep the fiber laser system efficient and enhance its longevity.
With consistent temperatures from laser cooling system CWFL-1000, your fiber laser system can always perform at an optimum.
Features:
1. Dual channel design for cooling fiber laser and the laser head, no need of a two-chiller solution;
2. ±0.5℃ precise temperature control;
3. Temperature control range: 5-35 ℃;
4. Constant temperature and intelligent temperature control modes;
5. Built-in alarm functions to avoid water flow problem or temperature problem;
6. CE, RoHS, ISO and REACH compliant;
7. User-friendly temperature controllers for easy operation
8. Optional heater and water filter.
Specification
Specification
Model
CW-FL-1000BN
Voltage
AC 1P 220V
Frequency
60 Hz
Current
3.4~10.5 A
Machine power
2.19KW
Refrigeration capacity
14757Btu/h 4.33KW   3719Kcal/h
Electric assisted power
400W+600W
Refrigerant
R-410a
Refrigerant charge
900g
Precision
±0.5℃
Reducer
Capillary
Protection
Overcurrent protection for compressor, flow alarm, over temperature alarm
Pump power
0.55 KW
Tank capacity
15 L
Inlet and outlet
Rp1/2”+Rp1/2”
Rated flow
2L/min+>12L/min
N.W
67Kgs (148lb)
G.W
77Kgs (170lb)
Dimension
700mm x 470mm x 890mm(27.6in x 18.5in x 35in)
Package dimension
740mm x 610mm x 1040mm(29.1in x 24in x 41in)
The max. pump flow is obtained by testing the pump individually on test criteria GB/T 3216-2005.criteria GB/T 3216-2005.
Note:
1. The working current can be different under different working conditions; The above information is for reference only. Please
subject to the actual delivered product;
2. Clean, pure, impurity free water should be used. The ideal one could be purified water, clean distilled water, deionised water, etc.;
3. Change out the water periodically (every 3 months is suggested or depending on the actual working environment);
4. Location of the chiller should be well ventilated environment. There must be at least 50cm from the obstacles to the air outlet which is on the top of the chiller and should leave at least 30cm between obstacles and the air inlets which are on the side casing of the chiller.
PRODUCT INTRODUCTION
User-friendly temperature controllers for easy operation
Equipped with drain port and universal wheels
Dual inlet and dual outlet port made of stainless steel to prevent potential corrosion or water leakage
Water level check lets you know when it’s time to refill the tank
Cooling fan of famous brand installed, With high quality and low failure rate
Alarm Description
CWFL-1000 chiller is designed with built-in alarm functions.
E1- ultrahigh room temperature
E2 - ultrahigh water temperature
E3 - ultralow water temperature
E4 - room temperature sensor failure
E5 - water temperature sensor failure
E6 - external alarm input
E7 - water flow alarm input
CHILLER APPLICATION